First Use - Zanussi ZDI101 User Manual

Programme
Rinse and Hold
1) When the Half load button is pressed, the prewash phase will be automatically excluded. In this case the detergent dose for
the prewash phase is no longer necessary.
2) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made to meet the needs of a family of 4
persons who only wish to load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes.
4) When the Half load button is pressed, the duration of the washing phase is reduced.

First use

Before using your dishwasher for the first time:
• Ensure that the electrical and water connec-
tions comply with the installation instructions
• Remove all packaging from inside the appli-
ance
• Set the water softener
• Pour 1 litre of water inside the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
When using tablets that
integrate rinse aid and
detergent:
there is no need to fill up with rinse aid
– set the water softener
– add special (dishwasher) salt
Half load
No Any.
Partial load (to be completed later in the
day).
Degree of soil
When using tablets that
integrate rinse aid, detergent,
salt function and other
additives:
there is no need to fill up with special salt or
rinse aid.
Check whether these detergents are suitable
for your water hardness. Follow the manufac-
turers instructions.
– Set the water hardness to level 1.
IMPORTANT!
If the drying results are not satisfactory we rec-
ommend that you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Set the rinse aid dosage to position 2.
If you decide in future to use separated deter-
gents, we advise that you:
Type of load Programme de-
1 cold rinse (to
avoid food scraps
from sticking
together).
This programme
does not require the
use of detergent.
scription
7