Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDI12010XA
Summary of Contents for Zanussi ZDI12010XA
- Page 1 User manual Dishwasher ZDI12010XA...
-
Page 2: Table Of Contents
Warning! Risk of fire and electrical the water flow until it is clean. shock. • The first time you use the appliance, make sure that there is no leakage. • The appliance must be earthed. www.zanussi.com... - Page 3 • Put knives and cutlery with sharp points in Model : the cutlery basket with the points down or in PNC : a horizontal position. Serial Number : • Do not keep the appliance door open with- out supervision to prevent to fall on it. www.zanussi.com...
-
Page 4: Control Panel
Crockery, cutlery, Wash 70 °C pots and pans Rinses Normal soil Prewash 100 - 110 1.2 - 1.6 15 - 16 Crockery and cut- Wash 65 °C lery Rinses Fresh soil Wash 65 °C Crockery and cut- Rinse lery www.zanussi.com... -
Page 5: Before First Use
36 - 45 23 - 28 40 - 50 4.0 - 5.0 28 - 35 19 - 22 33 - 39 3.3 - 3.9 23 - 27 15 - 18 26 - 32 2.6 - 3.2 18 - 22 www.zanussi.com... - Page 6 Filling the salt container Caution! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. www.zanussi.com...
-
Page 7: Daily Use
1. Set the water softener to the highest level. 2. Make sure that the salt container and the rinse aid dispenser are full. www.zanussi.com... - Page 8 3. Press the start button to start the count- down. • The start indicator comes on. Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance con- tinues from the point of interruption. www.zanussi.com...
-
Page 9: Hints And Tips
Care and cleaning Warning! Before maintenance, Make a check regularly and, if necessary, deactivate the appliance and disconnect clean them. the mains plug from the mains socket. Dirty filters and clogged spray arms de- crease the washing results. www.zanussi.com... -
Page 10: Troubleshooting
The appliance does not start or it stops during With some problems, different indicators operation. flash continuously or intermittently at Before you contact the Service, refer to the in- the same time to show an alarm code. formation that follows for a solution to the problem. www.zanussi.com... - Page 11 If other alarm codes show, contact the Serv- • The quantity of detergent is too much. ice. Stains and dry water drops on glasses and dishes • The released quantity of rinse aid is not suf- ficient. Adjust the rinse aid selector to a higher position. www.zanussi.com...
-
Page 12: Technical Information
Help protect the environment and human municipal office. health and to recycle waste of electrical and • Discard correctly the packaging material. electronic appliances. Do not dispose Recycle the materials with the symbol www.zanussi.com... - Page 13 www.zanussi.com...
- Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...