Zanussi ZDI101 User Manual page 5

Programme selector dial and On/Off switch
Start/cancel button
Half load button
Programme selector indicator light
Wash indicator light
Dry indicator light
• when in this position, the machine is switched off
(corresponding light off),
• when the marker on the dial corresponds with a
programme, the machine is switched on and a pro-
gramme is selected (programme selector indicator
light on)
• Starting the washing programme:
1. Select a washing programme.
2. Press the Start/Cancel button (corresponding
light on).
IMPORTANT!
Once the programme has started, if you want to
change the selection made you must cancel the wash-
ing programme in progress.
• Cancel the washing programme in progress:
1. Press and hold the Start/Cancel button until the
corresponding light turns off.
2. Release the Start/Cancel button.
3. Turn the programme selector dial to the Off po-
sition or select a new washing programme
(check that there is detergent in the detergent
dispenser).
The option must be linked to the selection of a washing
programme. (See "Programme table" chart). When
selected, the corresponding light illuminates.
Load dishes in both baskets (lower and upper). When
using the option reduce the dosage of detergent which
is normally used for a complete load.
Illuminates when the washing programme is selected
Indicator lights
Illuminates when the washing and rinsing phases are
running.
Illuminates when the drying phase is running.
5