Oce Saddle Finisher-AF2 User Manual page 27

Step Action
7 Return the staple case to its original
position in the saddle stitch unit.
Make sure that the arrow on the sta-
ple case aligns with the arrow on the
saddle stitch unit.
Note:
Follow the steps 3 to 7 to re-
place the other staple car-
tridge in the saddle stitch
unit.
8 Gently push the saddle stitch unit
back into the printer.
9 Close the front door of the stacker/sta-
pler.
WARNING
When you close the front door of the
stacker/stapler, be careful not to get
your fingers caught, because this may
result in personal injury.
Replace the staple cartridge of the saddle stitch unit
Illustration
Chapter 3 - Use the stacker/stapler 27