Replace the staple cartridge of the saddle stitch unit
Introduction
When a staple cartridge of the saddle stitch unit of the optional Saddle Finisher-AF2 is
almost empty, the operator panel will display a message indicating which staple cartridge
must be replaced. The procedure below describes how to replace the staple cartridge.
Note:
This procedure is only necessary when the Saddle Finisher-AF2 is attached.
Required tool
•
Staple P1
Note:
You can order all required supplies at your local authorized dealer.
How to replace the staple cartridge of the saddle stitch unit
Replace the staple cartridge of the saddle stitch unit
Step
1
2
Action
Open the front door of the stack-
er/stapler.
Pull out the saddle stitch unit.
Replace the staple cartridge of the saddle stitch unit
#
Illustration
Chapter 3 - Use the stacker/stapler
25