Replace The Staple Cartridge Of The Stapler Unit - Oce Saddle Finisher-AF2 User Manual

Replace the staple cartridge of the stapler unit

Replace the staple cartridge of the stapler unit
Introduction
When a staple cartridge of the stapler unit inside the stacker/stapler is empty, the operator
panel will display a message indicating which staple cartridge must be replaced. The
procedure below describes how to replace the staple cartridge.
Required tool
• Staple N1
Note:
You can order all required supplies at your local authorized dealer.
How to replace the staple cartridge of the stapler unit
Replace the staple cartridge of the stapler unit
Step
1
2
22 Chapter 3 - Use the stacker/stapler
Action
Open the front door of the stack-
er/stapler.
Grab the green tab of the staple case
and pull the staple case out of the
staple unit.
Note:
When the stapler unit is at
the back and it is difficult to
pull out the staple case, turn
the dial at the bottom left-
hand side to the left to move
the stapler unit.
#
Illustration