Replacing A Headlight Bulb - Yamaha Diversion 900 Owner's Manual

1. Headlight coupler
2. Headlight bulb cover

Replacing a headlight bulb

This motorcycle is equipped with
quartz bulb headlights. If a headlight
bulb burns out, replace it as follows.
1. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Headlight bulb holder
2. Unhook the headlight bulb holder,
EAU00829
and then remove the defective
bulb.
WARNING
@
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
@
1. Do not touch this area.
3. Place a new bulb into position, and
CAUTION:
EW000119
@
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
@
4. Install the bulb cover, and then
5. Have a Yamaha dealer adjust the
6-30
then secure it with the bulb holder.
connect the coupler.
headlight beam if necessary.
EC000105
6