Removing And Installing Cowlings - Yamaha Diversion 900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Cowling A
2. Cowling B
Removing and installing
cowlings
The cowlings shown above need to be
6
removed to perform some of the main-
tenance jobs described in this chapter.
Refer to this section each time a cowl-
ing needs to be removed and installed.
1. Cowling A
2. Screw ( 2)
EAU01065
Cowling A
To remove the cowling
1. Remove the seat. (See page 3-11
for seat removal and installation
procedures.)
2. Remove the screws, and then pull
the cowling off as shown.
NOTE:
EAU03595
@
Pull the cowling up, then back to re-
move it.
@
To install the cowling
1. Place the cowling in the original
2. Install the seat.
6-5
position, and then install the
screws.