Adjusting The Front Fork; Adjusting The Shock Absorber Assembly - Yamaha Diversion 900 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Spring preload adjusting bolt

Adjusting the front fork

This front fork is equipped with spring
preload adjusting bolts.
WARNING
@
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
@
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection a. To decrease the spring pre-
load and thereby
suspension, turn the adjusting bolt on
each fork leg in direction b.
1. Current setting
2. Front fork cap bolt
EAU00285
NOTE:
@
Align the appropriate groove on the ad-
justing mechanism with the top of the
EW000035
front fork cap bolt.
@
CI-01E
Minimum (soft)
Setting 7
soften the
Stan-
Maximum (hard)
dard
6 5 4 3 2 1
3-13
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
CAUTION:
@
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
@
EAU00295
EC000015