Handlebar Switches - Yamaha Diversion 900 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Pass switch "PASS"
2. Dimmer switch
3. Hazard switch " "
4. Turn signal switch
5. Horn switch " "

Handlebar switches

Pass switch "PASS"
Press the switch to operate the passing
light.
Dimmer switch
Turn the switch to "
beam and to " " for the low beam.
Hazard switch "
The hazard switch should be turned on
under emergency or hazardous condi-
tions. All turn signal lights will flash si-
multaneously when this switch is
turned on with the main switch in the
"ON" or "
CAUTION:
@
The battery can discharge from ex-
tended use, making it difficult to op-
erate the starter.
EAU00118
@
NOTE:
@
EAU00120
Turn on the hazard switch to warn oth-
er drivers if your motorcycle must be
stopped where it might be a traffic haz-
ard.
@
EAU00121
" for the high
EAU00144
"
" position.
EC000006
3-9
Turn signal switch
To signal a right-hand turn, push the
switch to " ". To signal a left-hand
turn, push the switch to "
switch is released it will return to the
center position. To cancel the signal,
push the switch in after it has returned
to the center position.
Horn switch " "
Press the switch to sound the horn.
EAU00127
". Once the
EAU00129