PERIODIC MAINTENANCE AND MINOR REPAIR
Front wheel installation
1. Install the speedometer gear unit
into the wheel hub. Make sure the
wheel hub and the speedometer
6
gear unit are installed with the pro-
jections meshed into the slots.
2. Lift up the wheel between the front
fork legs. Make sure the slot in the
speedometer gear unit fits over
the stopper on the front fork outer
tube.
3. Install the wheel axle and let the
motorcycle down.
4. Install the calipers and caliper
EAU01469
bolts. Make sure there is enough
gap between the brake pads be-
fore installing the calipers onto the
brake discs.
5. Tighten the wheel axle, pinch bolt
and caliper bolts to the specified
torque.
Tightening torque:
Wheel axle:
59 Nm (5.9 m·kg)
Pinch bolt:
19 Nm (1.9 m·kg)
Caliper bolt:
40 Nm (4.0 m·kg)
6. Push down hard on the handle-
7. Install the speedometer cable.
6-29
bars several times to check for
proper fork operation.