Wheels; Clutch Lever Free Play Adjustment - Yamaha Diversion 900 Owner's Manual

Wheels

To ensure maximum performance,
long service, and safe operation, note
the following:
Always inspect the wheels before
a ride. Check for cracks, bends, or
warpage of the wheels. If any ab-
normal condition exists in a wheel,
consult a Yamaha dealer. Do not
attempt even small repairs to the
wheel. If a wheel is deformed or
cracked, it must be replaced.
Tires and wheels should be bal-
anced whenever either one is
changed or replaced. Failure to
have a wheel balanced can result
in poor performance, adverse han-
dling characteristics, and short-
ened tire life.
Ride at moderate speeds after
changing a tire since the tire sur-
face must first be broken in for it to
develop its optimal characteristics.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU00687
1. Locknut
2. Adjusting bolt
c. Free play
Clutch lever free play
adjustment
The clutch lever free play should be ad-
justed to 10 ~ 15 mm.
1. Loosen the locknut at the clutch le-
ver.
2. Turn the adjusting bolt at the
clutch lever in direction a to in-
crease free play or in direction b
to decrease free play.
3. Tighten the locknut at the clutch
lever.
1. Locknut
2. Adjusting nut
If the specified free play cannot be ob-
EAU00694
tained, proceed with the following
steps.
4. Loosen the locknut at the clutch le-
5. Turn the adjusting bolt at the
6. Loosen the locknut at the crank-
7. Turn the adjusting nut at the
8. Tighten the locknut at the crank-
6-18
ver.
clutch lever in direction a to loos-
en the cable.
case side.
crankcase in direction a to in-
crease free play or in direction b
to decrease free play.
case and the clutch lever.
6