Setting The Handset Ringer; Conference Calling - VTech VT 2961 Manual

BASIC OPERATIONS

SETTING THE HANDSET RINGER

1. Press PROG on the Handset.
2. Press until RINGER is flashing.
3. Press SELECT.
4. Press or
5. Press SELECT.
6. Press to hear the 4 different ringer types, or to turn the ringer OFF for that
line.
7. Press SELECT to confirm your selection.

CONFERENCE CALLING

To talk to both lines at the same time:
1. While you are one line, press HOLD.
2. Make or receive a call on the avaiable line.
3. Press CONF. You are now talking to both lines.
4. To end your conference call, press OFF.
The procedure is the same for the Handset and Base.
To place both lines on hold, press HOLD. Press CONF to return to the conference call. To switch
from Handset to Base ( or vice versa), press HOLD on whichever component you're using, then
CONF on the other.
NOTE: Both the Handset and Base can join in the Conference call.
to select LINE1 or LINE2.
14