Table of Contents
Advertisement
Getting started
Remove your Television carefully from the box.
You may wish to store the packaging for future
use.
In the box
Inside the carton box you should have:
• Accessories box
• Power cord
• Adapter
• Remote control
• Batteries
Read these instructions before use.
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the quality
of the reception may be reduced and adjustment
of the aerial may be required when changing
programs.
Please note
If you live in a poor reception area or use an
indoor aerial you may experience loss or
c o r r u p t i o n o f t e l e t e x t t r a n s m i s s i o n s .
Switching on and First Use
1.
Connect the power cord to the mains plug.
2.
Connect the input socket of the adapter to
the15 V DC socket at the back panel of the
LCD TV.
3.
Connect adapter to the mains plug.
Note 1:
Your TV will move to stand-by mode
in five minutes when there is no broadcast signal.
Note 2:
Your TV is equiped to operate with
front panel buttons, "MENU", "PR+", "PR-", "+",
"–" in case your R/C is broken or the batteries
are exhausted.
Please Note
When not in use disconnect the plug
mains power supply.
4. Press the Power button on the
front of the TV. The standby indicator
will illuminate.
5. Press a Numeric button or the
Program up or Program down
7
button on the remote handset or
Program up, Program down
or MENU button on the front panel
to switch the TV on.
The standby indicator remains on.
The picture will appear after a few
seconds.
Press the Standby button to switch
the TV to standby. The standby indicator
will brighten.
Please Note
Do not leave the television in standby unattended
or overnight.
Switching the TV on for the first time
To install your TV, please read the sections
"TV controls" and " Tuning the television".
The batteries
Remove the back cover to reveal the battery
compartment and make sure you insert the
batteries the right way round.
Suitable battery types for this remote are
UM-4, IEC R03 or AAA 1.5V.
Do not throw your old batteries into a fire,
dispose of them in a designated disposal area.
Do not combine a used, old battery with a new
one or mix battery types.
The performance of the remote control will
deteriorate beyond a distance of 8 metres or
outside an angle of 30 degrees from the centre
of the TV.
ENGLISH -7-
from the
Advertisement
Table of Contents
