Table of Contents
Advertisement
Connecting external
equipment
You can connect a wide range of audio and video equipment
to your TV.
Connecting a video recorder
Via SCART
Make sure the TV and video recorder are both
switched off.
Plug one end of the SCART lead (not supplied)
into the back of the video recorder and the
other end into one of the SCART sockets on
the back of the TV.
Switch on the video recorder and the TV.
Press the AV button on the remote
AV
control to select AV1 or AV2 to
correspond with the SCART socket
you are using on the back of the TV.
Please note:
You can connect RGB external equipment
via Scart. It is necessary to you use a full Scart
cable for this purpose.
Select the video output of the external device
by using its menu, and set to RGB.
Via RCA lead (optional)
Make sure the TV and video recorder are
both switched off.
Plug one end of the RCA lead into the
video and audio out sockets on the back
of the video recorder and plug the other
end into the video and audio in sockets
of the TV.
If the sound is mono, use the Audio Input
L. and in the SOUND menu select the
MONO feature.
VOLUME
BALANCE
SOUND TYPE
SOUND MODE
AVL
EQUALISER
HEADPHONE
STORE
ENGLISH -21-
SOUND
MONO
SPATIAL
ON
Advertisement
Table of Contents
