Table of Contents
Advertisement
Via aerial socket
Make sure the TV and video recorder are
both switched off.
Unplug the aerial lead form the TV and
plug it into the aerial socket on the video
recorder.
Plug a coaxial plug into the RF out socket
on the rear of the video recorder and plug
the other end into the aerial socket on the
TV.
Switch on the video recorder and the TV.
If your video recorder has a test signal,
switch it on. (Refer to the video recorder
user guide).
See 'Tuning the TV' and carry out the tuning
procedure for the video recorder test
signal. Select a programme number 0.
S-Video In
Via RCA lead and S-Video
socket
You can also connect it through the
S-Video socket of the TV.
Plug the S-Video plug into the S-Video
socket and the audio leads into the
audio sockets.
ENGLISH -22-
Advertisement
Table of Contents
