Table of Contents
Advertisement
Using the TV
Turning on for the first time and Tuning
TV controls
Stand-By mode
When your TV is working, press the
red "STAND-BY" button on the right
upper corner of your remote control
to switch off and the Stand-By
indicator (Led) will be brighter. To
turn on your TV again, press the
numeric buttons, or Program up
or Program down.
Please Note: If you will not use your TV
for a long period, do not leave it on Stand-
By mode, instead switch it off from the power
button on the front panel of the TV set.
Programme selection
Press the Program up/Program
down buttons on the TV or on the
remote control or press a Numeric
button to select a programme.
1
To select a programme whose
number is greater than 9 using the
numeric buttons, press the -/-- button
-/--
first and then press the two Numeric
buttons. For example, to select
1
programme 12, press the -/- button
2
followed by 1 then and 2.
You can also select a program by
pressing in the Yellow button to see
the Program Table.
Use the Program up and
Program down buttons to scroll
through the programme numbers.
When you find the program number
you want press the OK button.
OK
Press the TV/TX button to close
the Program Table.
Volume
Press the Volume + or Volume -
button on the TV or the Vol
Vol
A sound level bar will appear on the
screen.
Mute
To mute the sound press the Mute
button on the remote control. A
loudspeaker symbol will appear on
the screen.
ENGLISH -10-
button on the remote control.
or
Advertisement
Table of Contents
