Manual Tuning - Toshiba Stasia 20VL33 Owner's Manual

Lcd display
Hide thumbs Also See for Stasia 20VL33:
Table of Contents

Advertisement

Please note
The system will be displayed automatically on
SYSTEM line i.e.BG, L, I or DK depending
on the receiving broadcasting system of your
country. In some countries the broadcasting
system can be both in BG/DK or BG/LL´.
Only the TV sets produced with Pal Secam
BG/DK or Pal Secam BG/LL´ systems can
receive both BG/DK or BG/LL´ broadcasts.
In this case the user can select the required
SYSTEM using Volume up/down buttons.
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Use the Program down button to select
AUTOPROGRAM and then the OK
button. A list of countries will appear.
Select the desired country using
OK
Program and Volume buttons.
When you are sure the aerial is
OK
connected properly press the OK
button. Autoprogam will start.
To cancel Autoprogram whilst it is
working press the Menu button
repetitively.
As Autoprogram stores a channel it
will appear briefly on the screen before
the search continues.
Your TV is now tuned and ready to
use.
Please note:
If auto sort fails to arrange the programmes in
the required sequence please refer to programme
organising.

Manual tuning

If you want to tune manually:
CHANNEL
SYSTEM
SEARCH
FINE TUNE
PROGRAM NUMBER
AUTO PROGRAM
STORE
OK
ENGLISH -12-
In the Setup menu select
PROGRAM No. using the
Program down button and use
the Volume up button to change
the Program No to 01.
Starting with Program 01, tune
in the first channel as follows:
Use the Program down button
to select SEARCH.
Press the Volume up or
Volume down button to start
the tuning search.
When the search finds a strong
channel signal it will stop
searching. The picture will
appear.
SETUP
Use the Program down button
t o s e l e c t P R O G R A M N o .
Use the Volume up/down or
numeric buttons to select the
desired programme number.
Use the Program down button
to select STORE. Press the OK
button and STORED will appear
on the STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.

Advertisement

Table of Contents
loading

Table of Contents