Table of Contents
Advertisement
Connecting a decoder
Via SCART
Make sure the TV and decoder are both
switched off.
Plug one end of the SCART lead (not
supplied) into the back of the decoder and
the other end into the SCART on the back
of the TV.
Switch on the decoder and the TV.
Press the AV button on the remote
AV
control to select AV1.
Via RCA lead
Make sure the TV and decoder are both
switched off.
Note: For Decoder connection Via RCA
lead your Decoder device must have the
tuner built in.
Plug one end of the RCA lead into the
video and audio out sockets on the back
of the decoder and plug the other end
into the video and audio in sockets on
the TV.
ENGLISH -24-
Advertisement
Table of Contents
