Af Micro Adjustment - Sony NXCAM NEX-EA50UH Operating Manual

REAR SYNC.
Flashes just before the exposure ends.
Trails of moving objects follow their
natural direction of movement.
OFF
Does not flash.
x FLASH LEVEL
-3.0EV - B0EV - +3.0EV (1/3EV
increments)
b Notes
• The set value may not be effective depending on
the connected flash (sold separately).
x RED EYE REDUCTION
A flash (sold separately) strobes 2 or more
times before shooting to reduce the red-eye
phenomenon.
B OFF
Does not use Red Eye Reduction.
ON
A flash always strobes to reduce the red-
eye phenomenon.
b Notes
• [RED EYE REDUCTION] is available in still
image recording mode only.
• Turn on the power of a flash (sold separately)
attached to use Red Eye Reduction.
• Red Eye Reduction may not produce the desired
effects. It depends on individual differences and
conditions, such as distance to the subject, or if
the subject looked away from the pre-strobe.
• There are certain flash units that you cannot use
with Red Eye Reduction.
z Tips
• Pupils become dilated in dark environments.
Flash light is reflected off the blood vessels at
the back of the eye (retina), causing the
"redeye" phenomenon.

AF MICRO ADJUSTMENT

When you use the LA-EA2 mount adaptor
(sold separately) and an A-mount lens, you
can register a specific focal setting for that
lens.
x ON/OFF
B OFF
Deactivates AF micro adjustment.
ON
Activates AF micro adjustment.
AMOUNT
x
You can set the adjustment value of the
attached lens.
Set a higher value to focus farther from the
camcorder, or set a lower value to focus
closer to the camcorder.
-20 - 0 - +20
B
x CLEAR ALL
You can clear the values of all the
registered lenses.
b Notes
• When [AF MICRO ADJUSTMENT] is not set
to [ON], you cannot register an adjustment
value.
• We recommend that you decide the value under
actual shooting conditions.
• When you attach a lens that is registered on the
camcorder, the registered value is displayed. If
the lens is unregistered, [±0] is displayed.
• If the number of registered lenses reaches 30,
the [AMOUNT] is grayed out and cannot be
selected. To register any further lenses, you first
need to delete already registered lenses. To do
this, attach a lens to delete its registered value,
then reset its value to "±0." Alternatively, you
can reset the values of all lenses with [CLEAR
ALL].
• If you perform AF micro adjustment with the
lens of another manufacturer, the adjustment
values of Sony, Minolta, and Konica Minolta
lenses may be affected. Do not use this function
with lenses of any other manufacturer.
89
Continued ,