Adjusting The Volume; Setting The Headphone Sound; Useful Functions; Customizing The Picture Quality (Picture Profile) - Sony NXCAM NEX-EA50UH Operating Manual

z Tips
• When you use a stereo microphone (2 XLR
plugs), connect the L (left) channel plug to the
INPUT 1 jack, and the R (right) channel plug to
the INPUT 2 jack. Set the CH1 switch to INPUT
1, and the CH2 switch to INPUT 2.

Adjusting the volume

When both the CH1/CH2 switches are set
to INT MIC, left and right channels are
linked to the CH1 switch and dial.
1
Set the AUTO/MAN switch (E or
I) of the channel to be adjusted
to MAN.
appears on the LCD screen.
2
During recording or standby, turn
the AUDIO LEVEL dial (F or J)
of the channel to be adjusted.
To restore automatic adjustment
Set the AUTO/MAN switch (E or I) of
the manually adjusted channel to AUTO.

Setting the headphone sound

You can select the channel by setting the
switch to CH1 or CH2, to output from the
headphone.
See [HEADPHONE OUT] on the sound at
STEREO MIX (p. 92).

Useful functions

Customizing the picture quality
(Picture profile)
You can customize the picture quality by
adjusting picture profile items such as
[GAMMA] and [DETAIL].
You can make adjustments for the time of
day, weather conditions, or just personal
preference.
Connect your camcorder to a TV or
monitor, and adjust the picture quality
while observing the picture on the TV or
monitor screen.
Picture quality settings for different
recording conditions have been stored in
[PP1] through [PP6] as default settings.
b Notes
• When you switch the recording mode, adjust the
setting value as this is applied to both movie and
photo.
53
Continued ,