Sony NXCAM NEX-EA50UH Operating Manual page 48

Adjusting the brightness (Continued)
z Tips
• It is difficult to focus automatically at a lower
shutter speed. Manual focusing with your
camcorder attached to a tripod is recommended.
• When recording under fluorescent lamps,
sodium lamps, or mercury lamps, the picture
may flicker or change colors, or may have
horizontal bands of noise. You may be able to
improve the situation by adjusting the shutter
speed to 1/100 if the power frequency of your
area is 50 Hz, or 1/60 in a 60 Hz area.
• You can switch the shutter speed display
between seconds and degrees ([SHUTTER
DISPLAY], p. 96).
To adjust the shutter speed
automatically
Press the SHUTTER SPEED button E
twice.
The shutter speed value disappears, or
appears next to the shutter speed value.
Setting value when switching
[60i/50i SEL]
The shutter speed of the same level before
changing the [60i/50i SEL] setting is
applied. See the following table for the
shutter speeds on each level. Shutter speed
for still images is not affected.
Level 60i/60p/30p
0 -
1 4
2 8
3 15
4 30
5 60
6 90
7 100
8 125
9 180
10 250
11 350
12 500
48
24p 50i/50p/25p
3 -
6 3
12 6
24 12
40 25
48 50
50 60
60 100
96 120
100 150
120 215
144 300
192 425
Level 60i/60p/30p
13 725
14 1000
15 1500
16 2000
17 3000
18 4000
19 6000
20 10000
24p 50i/50p/25p
200 600
288 1000
400 1250
576 1750
1200 2500
2400 3500
4800 6000
10000 10000