Hardware Description; Front Panel - Planet FSD-804PS User Manual

This product provides two different running speeds – 10Mbps, 100Mbps in the same Switch and automatically distin-
guishes the speed of incoming connection.
This section describes the hardware features of FSD-804PS. For easier management and control of the Switch, familiarize
yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED indicators. Before
connecting any network device to the FSD-804PS, read this chapter carefully.
In the following section, the term "Switch" means the Switch device, ie. FSD-804PS; term of "switch" can be any third
switches.

2.1 Front Panel

The Front Panel of the FSD-804PS PoE Web Smart Ethernet Switch consists of 8x Auto-Sensing 10/100Mbps Ethernet
RJ-45 Ports. The LED Indicators are also located on the front panel of the FSD-804PS.
2.1.1 LED indicators
■ System
LED Color
PWR Green
■ Per 10/100Mbps port
LED Color
PoE in-use Green
LNK/ACT Green
100 Green
1. Press the RESET button once. The Switch will reboot automatically.
Notice:
2. Press the RESET button for 5 seconds. The Switch will back to the factory default mode; the
entire configuration will be erased.
Figure 2-1: FSD-804PS Switch front panel
Lights to indicate that the Switch has power.
Lights to indicate the port is providing 48VDC in-line power. (1-4 ports)
Lit: indicate the link through that port is successfully established.
Blinks to indicate that the Switch is actively sending or receiving data over that port.
Lights to indicate the port is running in 100Mbps speed.
User's Manual of FSD-804PS

2. HARDWARE DESCRIPTION

Function
Function
- 7 -