802.1Q Vlan Setting - Planet FSD-804PS User Manual

3.5.3 802.1Q VLAN setting:

Select "802.1Q VLAN" and press "Apply" button, to enable the IEEE 802.1Q VLAN function then continue configure eight
802.1Q VLAN groups as your request. After setup completed, please press "Apply" to take affect. The screen in Figure
3-8 appears and table 3-4 descriptions the 802.1Q VLAN Setup object of Switch.
The page includes the following fields:
Object
VLAN
Port
Check Box (Member)
PVID
Output Tagging
Figure 3-8 802.1Q VLAN Setting Web Page screen
Description
The VLAN number. Select the number of the VLAN you want to configure here.
Select the physical interface for which you want to display or configure data.
Select the member of the VLAN here. If this field is checked, it indicates the port
belongs to the current VLAN.
Allow assign PVID for selected port. The range for the PVID is 1-4094
The PVID will be inserted into all untagged frames entering the ingress port. The
PVID must as same as the VLAN ID that the port belong to VLAN group, or the
untagged traffic will be dropped.
Allow 802.1Q Untagged or Tagged VLAN for selected port.
When adding a VLAN to selected port, it tells the switch whether to keep or remove
the tag from a frame on egress.
• Untag: outgoing frames without VLAN-Tagged.
• Tagged: outgoing frames with VLAN-Tagged.
Table 3-4 Descriptions of the 802.1Q VLAN screen Objects
User's Manual of FSD-804PS
- 20 -