Administration; Restarting The Gigaset Wlan Repeater - Siemens Gigaset WLAN Operating Instructions Manual

Administration

In Administration you can
u
restart the Gigaset WLAN Repeater.
u
update the firmware.

Restarting the Gigaset WLAN Repeater

If the Gigaset WLAN Repeater no longer functions properly, you can reboot it. The
device is then ready to use again.
ì
In the Administration menu, select Reboot.
ì
Click on OK. You will see a dialogue window prompting you for further confirma-
tion.
Rebooting the Gigaset WLAN Repeater takes a few moments. Then you have to log on
again before you can make any changes to the configuration.
Please remember:
If you can no longer access the configuration program, you can also reboot your
Gigaset WLAN Repeater by briefly disconnecting the power supply. Rebooting the
Gigaset WLAN Repeater takes a few moments. If this does not solve the problem, use
the reset button to restore your Gigaset WLAN Repeater to the factory settings (see
page 102).
Advanced Setup
91