Integration in the network
Assigning IP addresses automatically
Your Gigaset WLAN Repeater has a DHCP server that automatically assigns addresses in
the network. As a rule, you do not have to do anything, as the Obtain IP address auto-
matically function box is set during the installation of TCP/IP. If however you integrate
your Gigaset WLAN Repeater in an existing network with static address blocks, domain
names or subnets or if you cannot launch the configuration program straight away, you
should check the TCP/IP properties and make any necessary changes. This is described
below.
Windows XP
ì
Click on Start and select Control panel.
ì
Select Network and Internet Connections, then click on the Network Connec-
tions icon.
ì
Double-click on the LAN connection with which you are connected to the Gigaset
WLAN Repeater.
ì
Click on Properties.
24