Lan Settings - Siemens Gigaset WLAN Operating Instructions Manual

LAN settings

For Repeater mode.
In the next step, you will see the LAN screen for the basic setup of your local network.
ì
In IP address type specify whether the Gigaset WLAN Repeater should obtain its IP
address automatically from an external DHCP server in the network or not.
– If you want to use a static IP address for your Gigaset WLAN Repeater (factory set-
ting for the IP address is 192.168.2.254), select the option Static and enter the IP
address and subnet mask in the boxes underneath. Make sure that the IP address
you assign complies with the conventions for private IP addresses described on
page 31.
– Normally you do not have to change the option for the IP address type. If your
Gigaset WLAN Repeater nevertheless obtains its IP address automatically from a
DHCP server in your network, please select Obtained automatically.
Basic setup
47