Operating displays and connections
Front panel
LED displays
The front panel of the Gigaset WLAN Repeater contains LED displays that show the oper-
ating state and simplify installation and fault finding in the network.
The LEDs show the following:
LED
State
On
Power
Off
Green
Orange
LAN
Flashing
Off
On
WLAN
Flashing
Off
Status
The Gigaset WLAN Repeater has been switched on.
The Gigaset WLAN Repeater has been switched off.
There is a 100-Mbps connection to the local network via the
Ethernet cable.
There is a 10-Mbps connection to the local network via the
Ethernet cable.
The Gigaset WLAN Repeater is sending or receiving data via
the Ethernet cable.
There is no connection to the local network via the Ethernet
cable.
There is a wireless connection to the local network.
The Gigaset WLAN Repeater is sending or receiving data on its
WLAN interface.
The WLAN interface is not active.
First Steps
11