Smeg Oven Instructions For The User page 25

Instructions for the user
Cooking start: as well as setting a cooking duration, the cooking start time can
also be set (with a maximum delay of 12 hours in relation to the current time). To
set the cooking start/end time, proceed as follows:
• Set the cooking duration as described in the previous point.
• Within 5 seconds of last pressing key
the cooking end time. Symbol
current time, with internal segments illuminated to show the end of cooking
time. Use keys
• 5 seconds after the last key is pressed, the display will show the current time and
the cooking start and end times, which will be represented by the illuminated
inside segments. The display segments will be constantly illuminated as long as
the current time is not the same as the cooking start time; as soon as the current
time reaches the set starting time, all the inside segments will start to flash,
indicating that the oven has started cooking.
• At the end of the cooking time the timer will switch the oven heating elements off,
the beeps will start to sound and the numbers on the dial will flash.
• To delete the entire set program, hold down the central key
cooking has already started, the oven will have to be switched off manually.
• Here we can see a programming example: the
current time
programmed to start at 8.00 and end at 9.00.
• At 8 o'clock the inside segments between 8
and 9 will start to flash, while the hours hand
will remain still.
Warning: for the oven to start cooking operations after the programming
procedures just described, the thermostat and functions switch knob
must be correctly set on the required temperature and function.
7.8.4 Display brightness reduction
To reduce energy consumption in stand-by, briefly press key
display brightness. To restore the normal brightness, press
and to set the cooking end time.
is 7:06 and cooking
or , press key
will flash on the display together with the
is
again to set
for 2 seconds; if
to reduce the
again.
75