Yamaha MOTIF ES Owner's Manual page 88

Editing a Performance
3
Call up the Common Edit display or Part Edit display.
Use the Part Edit to edit the parameters for each Part. Use Common Edit to edit the parameters for all of the Parts.
While in the Voice Edit mode, you can switch between
the Common Edit display amd the Part Edit display
as shown below.
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
Indicates a Common Edit
display.
n
You can mute or solo a Part in the Performance
Edit mode, just as in the Performance Play mode
or the Song/Pattern mode (page 68).
Select the menu you wish to edit by pressing the
4
[F1] - [F6] and [SF1] - [SF5] buttons, then edit the
parameters.
The following briefly describes the main Performance
parameters.
Parameters for the Voice assigned to each Part
Part selection [F1] VOICE
The Voice assigned to each part and its note range can be
set also in the Performance Play mode (page 71). In addition
to the parameters available in the Performance Play mode,
the Performance Edit mode also lets you set Portamento
(pitch glide) and Arpeggio Switch (which determines whether
the Arpeggio plays a specific Part or not).
Basic parameters for making sound
Part selection [F4] TONE
If you wish to edit the basic parameters for the synthesizer
such as Tune, Filter, and Amplitude, use the Part Edit display.
88
Owner's Manual
DRUM KITS
A. PIANO
FAVORITES
SYN LEAD
COMMON
Common Edit
...Page 216
................Page 218
Calling up the Part Edit display
PRE 5 PRE 6 USER 1 USER 2
Press the desired Part number from the
PERF. PART [1] - [4] buttons to call up the
KEYBOARD ORGAN GUITAR/
PLUCKED Part Edit display.
A B C D
Indicates the display for editing Part 1.
SYN PAD/ SYN COMP CHROMATIC
CHOIR PERCUSSION
1 2 3 4
ELEMENT/PERF. PART/ZONE
You can select the four Performance Parts
from this group of seven.
Plug-in part 1 (PLG1) Edit
Plug-in part 2 (PLG2) Edit
Plug-in part 3 (PLG3) Edit
Parameters related to the Audio Input part
[COMMON] [F5] AUDIO IN
The audio signal input from the A/D INPUT jack (or the
optional audio inputs) can be handled as an Audio Input part.
You can apply various parameters such as Volume, Pan, and
Effect settings to this Part — just as you can with the other
Parts. The parameters related to the Audio Input Part can be
edited in Common Edit for each Performance.
Parameters related to the OUTPUT jacks for each
part
................................................................................ Page 218
Part selection [F2] OUTPUT
OutputSel
You can assign each individual Part's Voice to be output from
a specific hardware output jack on the rear panel. This
function is useful when you want to output a specific Part to a
separate speaker or process it with a favorite external effect.
To switch between the Part 1 - 4
display and the Plug-in Part 1 - 3
display, press the [F6] button.
Part1 Edit
Part2 Edit
Parts to which Internal
voices are assigned
Part3 Edit
Part4 Edit
Parts to which Plug-in
Board voices are
assigned
........... Page 214
[SF3] SELECT
6
F