Pattern Record Mode - Yamaha MOTIF ES Owner's Manual

[F2] COPY
[F3] SONG

Pattern Record mode

Pattern Record Standby mode
[F1] SETUP
Type (Recording Type)
Loop
Quantize
Event
(Tempo)
Meas (Measure)
[F2] VOICE
From this display you can set Voice-related parameters for the selected track. The settings made here affect the tone generator parts whose MIDI receive
channels match the MIDI transmit channel of the song track. The Voice set here becomes the phrase Voice (page 167).
Parameters are the same as in the Song Record mode. See page 223.
[F3] ARP (Arpeggio)
From this display you can set parameters related to the Arpeggio of the recording track.
Parameters are the same as in the Song Record mode. See page 223.
[F4] REC ARP (Record Arpeggio)
From this display you can determine whether the sequence data played by Arpeggio is recorded to the Pattern track or not.
Parameters are the same as in the Song Record mode. See page 223.
[F5] CLICK
Pressing the [F5] button lets you turn the click sound (metronome) on/off for recording.
Source range
Top measure of destination
CAUTION This operation overwrites any events already existing at the destination.
This function converts the Pattern chain data to Song data (standard MIDI format) and places the results in the
normal Song tracks.
After specifying the desired destination Song and measure number to which the converted data is to be copied,
then press the [ENTER] button to execute.
CAUTION
This operation overwrites any data already existing at the destination range.
[PATTERN]
Determines the recording method.For information on each method, refer to page 168 in the Basic Structure section.
Settings: replace, overdub, step
n
Unlike in the Song Record mode, Punch recording is not available for Pattern recording.
Turns loop recording ON or OFF.
When ON, the phrase will play repeatedly during real-time recording. This can be handy when recording drum parts
(page 168), allowing you to add different instruments on each pass.
When OFF recording stops after one pass through the phrase.
Settings: on, off
Same as in the Song Record mode. See page 222.
Same as in the Song Record mode. See page 223.
Determines the Pattern tempo.
Settings: 001.0 ~300.0
n
Unlike in Songs, Scene track and Tempo track are not available for Patterns.
Determines the measure from which Pattern recording will be started.
Pattern Record mode
This display lets you copy all Pattern chain events from
a specified range of measures (source) to a destination
location.
After specifying the source range in measures, the top
measure of the destination location, and
NumberOfTimes (number of times the data is copied),
press the [ENTER] button to execute the Copy
operation.
Pattern selection [I] (Record)
Pattern Record Standby mode
Owner's Manual
243