Yamaha MOTIF ES Owner's Manual page 245

02: Copy Event
03: Erase Event
04: Extract Event
05: Create Continuous Data
06: Thin Out
07: Modify Control Data
08: Beat Stretch
[F4] PHRASE (Phrase Job)
01: Copy Phrase
02: Exchange Phrase
03: Mix Phrase
04: Append Phrase
05: Split Phrase
Same as in the Song Job mode. See page 229.
Same as in the Song Job mode. See page 229.
n
Unlike in the Song Job mode, "Tempo," "Scene Memory," or "Track Mute" cannot be selected as Event Types.
Same as in the Song Job mode. See page 230.
Same as in the Song Job mode. See page 230.
n
Unlike in the Song Job mode, "Tempo" cannot be selected as an Event Type.
Same as in the Song Job mode. See page 230.
Same as in the Song Job mode. See page 230.
n
Unlike in the Song Job mode, "Tempo" cannot be selected as an Event Type.
Same as in the Song Job mode. See page 231.
Selects the Pattern and phrase to be copied.
(Preset phrase also can be selected.)
Specify the destination Pattern and phrase.
n
When there is no memory available in the destination Pattern for Sample Voice data, an error message will appear on the
display and the Sample Voice data will not be copied. If this occurs, use Sample Job 02 "Delete" to delete any unused Sample
Voices, then try again.
CAUTION
Any previous data in the copy destination will be overwritten.
CAUTION
Undo/Redo (page 244) cannot be used to undo/redo a Sample Voice copy operation.
This Job exchanges or "swaps" the contents of two specified phrases ("A" and "B").
n
If this Job is applied to phrases which use Sample Voices, the Sample Voices will not be exchanged.
This Job mixes all data from two selected user phrases ("A" and
"B"), and places the result in phrase B.
n
Keep in mind that applying this Job to phrases with Sample Voices
does not mix the Sample Voices.
This Job appends one phrase (A) to the end of another (B) to
create one longer phrase (B).
n
If this Job is applied to phrases which use Sample Voices, the
Sample Voices will not be appended.
This Job splits a selected phrase (A) into two separate phrases (A
and B).
The data before the split point is stored to the original phrase A
and the data after the split point is moved and stored to another
phrase B. You can also set the Meter of the phrase B after the Split
Phrase Job.
n
When either Pattern or Phrase is set to "off," the split Phrase B data
is erased.
n
If this Job is applied to phrases which use Sample Voices, the
Sample Voices will not be split.
CAUTION
The Job overwrites any data already existing in destination phrase B.
Pattern Job mode
This Job copies a selected phrase to the designated
destination phrase.
After specifying the source Pattern and phrase, the
destination Pattern and phrase, and setting the
checkbox of Copy Sample, press the [ENTER] button to
execute this Job.
When the Copy Sample box is checkmarked, Sample
Voices used by the source phrase are copied to the
destination Pattern as Sample Voices, and are assigned
to the destination phrase. This is available only when
the Sample Voice is used in the source phrase.
Phrase A Phrase B
Mix Phrase
Phrase B
Phrase A
Append Phrase
Phrase B
Phase A is divided at the Split Point
Phrase A
Phrase A
Phrase B
245
Owner's Manual