Yamaha MOTIF ES Owner's Manual page 127

TIP Using the Undo/Redo functions
If you're not satisfied with the results of a just-executed Job, or you want to hear the difference of the sound before and
after using a Job, you can use the convenient Undo and Redo functions. After changing the data with a particular Job,
repeat steps #1 -4 as desired.
1
Press the [SONG] button to return to the Song Play mode, then press the [F] button to hear the Song as it was
changed by the Job.
This lets you check the results of the Job.
2
After stopping the song, press the [JOB] button followed by the [F1] UNDO button to call up the Undo display.
Press the [ENTER] button to execute Undo.
The Song data is restored to its previous state.
Indicates the operation to be affected by Undo.
3
Press the [SONG] button to return to the Song Play mode, then press the [F
This lets you check the sound before actually making changes to it with the Job.
4
After stopping the song, press the [JOB] button followed by the [F1] UNDO button to call up the Undo display.
Press the [ENTER] button to execute the Redo.
This lets you "redo" the Job, restoring the Song to the changes you made before using Undo in step #2 above.
Indicates the operation to be affected by Redo.
n
Undo/Redo is applied to the most recent operation (Job, Edit, Record, etc.).
n
The Undo/Redo Job is available also in the Pattern Job mode.
Editing Mixing parameters to complete a Song (in the Mixing mode/Mixing Edit mode)
In this final step (other than saving your precious work, which we'll cover next), you can mix down your tracks with the Song
Mixing function – adjusting the volume balance and pan setting of all the parts and tweaking the effect levels.
n
The explanations here also apply to the Pattern mode.
1
Press the [SONG] button to enter the Song Play mode, then select a Song for which Mixing edits have been made.
2
Enter the Song Mixing mode by pressing the [MIXING] button (the lamp lights).
Select the menu you wish to edit by pressing the [F1] - [F4] buttons, then edit the parameters in each display.
If you alter any parameters, the [E] indicator will appear in the top left of the display.
You can use the Song Mixing mode for Sample Mixing as well. For information on the available parameters, see page 233.
If you wish to edit more detailed Mixing parameters, enter the Song Mixing Edit mode.
[ENTER]
button
Changes to "Redo."
F ] (Play) button to play the song. F
F
[ENTER]
button
Changes to "Undo."
Press the [F6] button to switch between the display for
Parts 01-16 (for the internal tone generator), 17-32 (for
the Multi-Part Plug-in Board PLG100-XG), and PLG1-3
(for the Single Part Plug-in Board).
Press the [F5] VCE ED button to enter the Mixing
Voice Edit mode (page 105).
Creating a Song on the MOTIF ES
Owner's Manual
127