Information Display; Note (Key) Settings; Naming; Owner's Manual - Yamaha MOTIF ES Owner's Manual

Information Display

This convenient function lets you call up relevant details about the selected mode – simply by pressing the [INFORMATION]
button. For example, when the Voice mode is active, you can quickly check information about which voice bank is selected, what
Play mode (poly or mono) is being used, which effects are applied, and so on.
For details, see page 275.

Note (Key) settings

Several parameters let you set a key range for a function – for example, in setting up a keyboard split – by specifying certain
note values. You can use the [INC/YES] and [DEC/NO] buttons or data dial to set these parameters, or you can directly enter the
values from the keyboard by pressing the appropriate keys (as shown below).
When Note Limit is selected, the [KBD] mark appears,
indicating that you can use the keyboard to set the value.
Simultaneously hold down the [INFORMATION] button
and press the appropriate key.
n
About the note name assigned to each key, see page 16.

Naming

You can freely name the created data like Voice and the file saved to the SmartMedia/USB storage device. The chart below lists
the types of data that can be named along with the operations for calling up the respective naming displays.
Data types that can be named
Voice
Performance
Song
Pattern
Mixing Template
Mixing Voice
Phrase
Master
Waveform
Arpeggio
Volume Label of the SmartMedia/
USB storage device
File/Folder saved to the SmartMedia/
USB storage device
First, call up the name input display according to the above table, then, move the cursor by using the Cursor button to the
desired location and input a character. See below for details.
n
Since the name of the program is part of the data, make sure that you properly save the program after naming it.
INFORMATION
INFORMATION
How to call up the naming display
[VOICE] [EDIT] [F1] GENERAL
[PERFORM] [EDIT] [F1] GENERAL
[SONG] [JOB] [F6] SONG 04: Song Name
[PATTERN] [JOB] [F6] PATTERN
[SONG] or [PATTERN] [MIXING]
[SONG] or [PATTERN] [MIXING]
[PATTERN] [JOB] [F4] PHRASE
[MASTER] [EDIT] [F1] NAME
[INTEGRATED SAMPLING] [JOB]
[SONG] [JOB] [F5] TRACK 07: Put Track To Arp
[PATTERN] [JOB] [F5] TRACK
[FILE] [F1] CONFIG [SF3] FORMAT
[FILE] [F2] SAVE or [F4] RENAME
[SF1] NAME
[SF1] NAME
05: Pattern Name
[JOB] [F6] TEMPLATE
[F5] VCEED [F1] GENERAL [SF1] NAME
09: Phrase Name
[F2] WAVE 04: NAME
06: Put Track To Arp
Information Display
Page
80
89
233
248
237
106
246
138
259
130
130
266
132
53

Owner's Manual