Fill Clean Water Tank - Bissell TURBOCLEAN 2085 SERIES User Manual

Fill Clean Water Tank

1
3
Fill with warm tap water to the WATER
line. Fill the rest of the tank with BISSELL
Formula to the FORMULA line.
A few notes about filling the clean water tank:
• Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
NOTICE: Do not over wet carpet. Be careful not to run over loose objects or edges
of area rugs. Stalling the brush may result in premature belt failure.
NOTE: Do not substitute BISSELL 2X Formula cleaning solution with other
household cleaning products.
Pour in more power with BISSELL Boosts
• Fill tank with water and 2X formula (Step 3 above).
• Add 1 ounce of any BISSELL Boost per 1/2 gallon of water.
• The 2085 machine series have 1/2 gallon clean water tanks.
Remove the clean
water tank lifting
straight up and away
from lower body.
2
Unscrew the cap at the bottom of
the clean water tank.
4
Replace and tighten
the cap, then return
the clean water tank
to lower body. The
tank will make a
"CLICK" noise when
seated properly.
www.BISSELL.com
7