Installing The Transmission - Yamaha XT660R Service Manual

TRANSMISSION

INSTALLING THE TRANSMISSION

1. Install:
• shift fork "L" 1 (to drive axle)
• shift fork "C" 2 (to main axle)
• shift fork "R" 3 (to drive axle)
• shift drum 4
• transmission assembly
NOTE:
_
• The embossed marks on the shift forks
should face towards the right side of the
engine and be in the following sequence:
"R", "C", and "L".
• Make sure that the shift fork cam follower is
properly seated in the shift drum groove.
2. Check:
• shift operation
Unsmooth operation → Repair.
NOTE:
_
• Apply engine oil to each gear and bearing
thoroughly.
• Before assembling the crankcase, make
sure that the transmission is in neutral and
that the gears turn freely.
5 - 84
ENG