Disassembling The Front Brake Master Cylinder; Disassembling The Rear Brake Master Cylinder - Yamaha XT660R Service Manual

2
3
FRONT AND REAR BRAKES
3
1
1
2
4 - 32
EAS00588
DISASSEMBLING THE FRONT BRAKE
MASTER CYLINDER
NOTE:
_
Before disassembling the front brake master
cylinder, drain the brake fluid from the entire
brake system.
1. Disconnect:
• front brake light switch 1
NOTE:
Push the fastener to remove the front brake
light switch from the brake master cylinder.
2. Remove:
• union bolt 1
• copper washers 2
• brake hose 3
NOTE:
_
To collect any remaining brake fluid, place a
container under the master cylinder and the
end of the brake hose.
EAS00589
DISASSEMBLING THE REAR BRAKE
MASTER CYLINDER
1. Remove:
• union bolt 1
• copper washers 2
• brake hose 3
NOTE:
_
To collect any remaining brake fluid, place a
container under the master cylinder and the
end of the brake hose.
2. Remove:
• right side heel plate
CHAS