Assembling The Crankcase - Yamaha XT660R Service Manual

a
CRANKCASE
EAS00418

ASSEMBLING THE CRANKCASE

1. Lubricate:
• bearings
• oil seals
Recommended lubricant
Bearing
Engine oil
Oil seal
Lithium-soap-based grease
2. Install:
• bearings
New
• bearing retainer 1
(to the right crankcase)
• bearing retainer bolts
LT
NOTE:
Install the bearing retainer with the "OUT"
mark a facing up.
3. Thoroughly clean all the gasket mating sur-
faces and crankcase mating surfaces.
4. Apply:
• Yamaha bond No. 1215 1
(to the mating surfaces of both crankcase
halves)
Yamaha bond No. 1215
90890-85505
NOTE:
_
Do not allow any sealant to come into contact
with the oil gallery.
5. Install:
• dowel pins
• O-rings
New
5 - 74
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)