Changing The Engine Oil - Yamaha XT660R Service Manual

CHECKING THE ENGINE OIL LEVEL/

CHANGING THE ENGINE OIL

3 - 24
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
NOTE:
_
Before checking the engine oil level, wait a few
minutes until the oil has settled.
EAS00076
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine.
3. Remove:
• engine oil filler cap 1
• camshaft sprocket cover 2
4. Install the engine oil drain attachment 1
under the engine oil drain bolt of the crank-
case.
NOTE:
"engine oil drain attachment" is a part of the
owner's tool kit.
5. Remove:
• engine oil drain bolt (crankcase) 2
(along with the gasket)
6. Remove:
• engine oil drain bolt (oil tank) 1
(along with the gasket)
7. Remove:
• oil filter element drain bolt 1
8. Drain:
• engine oil
(completely from the crankcase and the oil
tank)
CHK
ADJ