I Tape Playback; Listening To A Cassette Tape (Tape 1 Or Tape 2) - Sharp CD-MPX100H Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2)

Before playback:
G For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
G Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
G Before loading a tape into the cassette compart-
ment, tighten the slack with a pen or a pencil.
I Tape 1 playback
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing
the area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment
with the side to be
played facing towards
you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
5
Press the / to start
playback.
Auto power on function:
When you press any of the following buttons, the unit turns on.
G TAPE (1
2) button (main unit and remote control): The unit turns
on and the "TAPE" function is activated.
G
/ button (main unit and remote control): The unit turns on and
playback of the last function starts (CD, TAPE, TUNER, VIDEO/
AUX).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
9/3/05 CD-MPX100H_2.fm
CD-MPX100H
ENGLISH
TAPE 1 TAPE 2
Tape play indicator
E-20
TINSZA162AWZZ
5
2
3
4
5
6
7
8