Listening To The Radio - Sharp CD-MPX100H Operation Manual

Listening to the radio

Auto power on function:
When you press any of the following buttons, the unit turns on.
G TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
G
/ button (main unit and remote control): The unit turns on and
playback of the last function starts (CD, TAPE, TUNER, VIDEO/
AUX).
I Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
G When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
G Auto scan tuning will skip weak signal stations.
G To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
G " " will appear when an FM broadcast is in stereo.
G If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
9/3/05 CD-MPX100H_2.fm
CD-MPX100H
ENGLISH
5
2
3
4
5
6
7
8
E-18
TINSZA162AWZZ