Speaker Connection - Sharp CD-MPX100H Operation Manual

CD-MPX100H
ENGLISH
I FM/AM loop aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for optimum
reception. Place the AM loop aerial on a shelf, or attach it to a stand
or a wall.
Notes:
G Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
G Do not connect the attached FM aerial to an external FM aerial.
Otherwise trouble may occur.
Installing the AM loop aerial:
<Assembling>
<Attaching to the wall>
Wall
E-7
I Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
G Use speakers with an impedance of 6 ohms
G Do not mistake the right and the left chan-
G Do not let the bare speaker wires touch
G Do not allow any objects to fall into or to be
G Do not stand or sit on the speakers. You may be injured.
I Placing the speaker system
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
Screws
(not supplied)
9/3/05
or more, as lower impedance speakers can
damage the unit.
nels. The right speaker is the one on the right
side when you face the unit.
each other.
placed in the reflex ducts.
Left speaker Right speaker
CD-MPX100H_1.fm
Incorrect
TINSZA162AWZZ