Speaker Connection; Demonstration Mode; To Turn The Power On - Sharp CD-XP200H Operation Manual

! Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) ter-
minal.
Right speaker
Red
Black
Caution:
" Use speakers with an impedance of 6 ohms or more, as
lower impedance speakers can damage the unit.
" Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the unit.
" Do not let the bare speaker wires touch each other.
" Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
" Do not stand or sit on the speakers. You may be injured.
! Placing the speaker system
There is no distinction between the right and the left speakers.
Left speaker
Note:
The speaker grilles are not removable.
! Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket. If you plug in the unit first, the unit will enter the dem-
onstration mode.
Left speaker
Notes:
" The unit will start the tape initialisation when plugged in to the AC socket. During
" Unplug the AC power lead from the wall socket if the unit will not be in use for a

! Demonstration mode

The first time the unit is plugged in, the unit will enter
the demonstration mode. You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the
EQUALIZER/X-BASS/DEMO button. The unit will enter the low power consumption
mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the EQUALIZER/X-BASS/DEMO
button again.
Note:
When the power is on, the EQUALIZER/X-BASS/DEMO button can be used to select
the extra bass mode.
Incorrect
Right speaker

! To turn the power on

Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
this process, initialising sound will be heard and the unit cannot be turned on. Wait
until the process is finished.
prolonged period of time.
02/02/21 CD-XP200H(H)E1.fm
CD-XP200H
ENGLISH
E-8