Playing A Dvd (Dvds) - Sharp CD-G10000DVD Operation Manual

Playing a DVD (DVDs)

CD-G10000DVD
CP-G10000
ENGLISH
E-33
*CD-G10000DVD(EN)33-35 33
5
-DISC
GHANGER
DV D MINI SYSTEM
CD-G10000DVD
To play a disc
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button to display the startup screen
shown.
3
Load the disc(s) you want to play.
See page 22 for information about loading discs.
4
Press the 0 button to start playback.
Notes:
I If the disc you are using supports auto start, it starts to play automatically
(even if you do not press the 0 button), as soon as you close the disc tray.
I The indicator " WRONG DISC TYPE" appears on the display if the disc
you are using is damaged, if you load the disc upside down, or if the region
number of the disc you are using is one that is not supported by this unit. If
the above indicator appears, reload the disc or replace it with another one.
I A safety feature automatically sets the unit to the power stand-by mode if
you set the volume level too high whilst playing certain types of discs. If this
happens, lower the volume level and restart playback.
I The unit also can directly power on at CD function by pressing DVD/CD
button or direct playback (if last function is CD) by pressing 0 button during
stand-by mode.
To play the desired disc:
Press one of the s 1 - s 5 buttons to select the desired disc and then press the
DIRECT PLAY button.
To stop disc playback:
Press the H button.
05.1.17, 10:48
CD-G10000DVD (S)
TINSZA160AWZZ
1
2
3
4
5
D D V 6
7
8
9
10