Table of Contents
Advertisement
MINI COMPONENT SYSTEM
MODEL
CD-G10000
SPEAKER SYSTEM
MODEL
CP-G10000S
OPERATION MANUAL
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP
product.
CD-G10000
CD-G10000 Mini Component System consisting of CD-G10000 (main
unit) and GBOXSA090AWM1 (rear speaker system).
CP-G10000S
CP-G10000S Speaker System consisting of CP-G10000S (front
speaker system) and CP-SW10000S (active subwoofer).
Accessories
Please confirm that the following accessories are included.
Remote control
1
AM loop antenna
(RRMCG0395AWSA)
(QANTL0005AWZZ)
Red
Black
Wire for front speaker
Wire for rear speaker
2
(QCNWHA003AWZZ)
(QCNWHA004AWZZ)
Note:
Only the above accessories are included.
1
FM antenna
1
(92LFANT1746A)
Gray
Black
Subwoofer cable
2
1
(QCNWGA003AWPZ)
Advertisement
Table of Contents
Related Manuals for Sharp CD-G10000
Summary of Contents for Sharp CD-G10000
-
Page 1: Speaker System
OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-G10000 CD-G10000 Mini Component System consisting of CD-G10000 (main unit) and GBOXSA090AWM1 (rear speaker system). -
Page 2: Special Notes
NOTES It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary. -
Page 3: Important Safety Instructions
Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. CD-G10000 CP-G10000S 0304... - Page 4 IMPORTANT SAFETY INSTRUCTIONS CD-G10000 CP-G10000S Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
-
Page 5: Table Of Contents
Specifications ........45, 46 CONSUMER LIMITED WARRANTY ....Back cover CD-G10000 CP-G10000S... -
Page 6: Precautions
Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of acci- dent causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. -
Page 7: Controls And Indicators
2) Button ....... 32 30. Game/Video Button ....... 40 CD-G10000 CP-G10000S... -
Page 8: Rear Panel
Controls and indicators (continued) CD-G10000 CP-G10000S Display 6 7 8 1. Disc Number Indicators ......23 2. -
Page 9: Active Subwoofer
9. AC Power Cord ........14 CD-G10000... -
Page 10: Controls And Indicators
Controls and indicators (continued) CD-G10000 CP-G10000S Remote control 1. Remote Control Transmitter ......16 2. Disc Number Select Buttons ......21 3. -
Page 11: System Connections
Connecting the subwoofer (see page 14) Speaker connection (see page 12) Antenna connection (see page 12) AM loop antenna FM antenna Front speaker (left) AC outlet (AC 120 V, 60 Hz) AC power connection (see page 14) CD-G10000 CP-G10000S Rear speaker (left) - Page 12 System connections (continued) CD-G10000 CP-G10000S Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received. Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack.
- Page 13 The speaker grilles are not removable. Outdoor FM antenna Use an outdoor FM antenna if you require better reception. Consult your dealer. Outdoor FM antenna 75 ohm coaxial cable Note: When an outdoor FM antenna is used, disconnect the supplied FM antenna wire. CD-G10000 CP-G10000S...
- Page 14 System connections (continued) CD-G10000 CP-G10000S Make sure to unplug the AC power cord of the main unit before making any connections. Connecting the subwoofer Use the subwoofer cable to connect the SUBWOOFER PRE-OUT jack on the main unit and the SUBWOOFER IN jack on the active subwoofer.
- Page 15 To return to the demonstration mode: When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again. Note: When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode. CD-G10000 CP-G10000S...
-
Page 16: Remote Control
Remote control CD-G10000 CP-G10000S Battery installation Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. 1 Open the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. -
Page 17: Subwoofer Control
To emphasize the bass, turn this control toward 35 Hz and increase the volume. Note: Observe the following to avoid malfunction and sound distortion. Do not set the volume too high on the main unit. The subwoofer may be damaged. CD-G10000 CP-G10000S... -
Page 18: General Control
General control CD-G10000 CP-G10000S To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. Illumination light control When the power is turned on, light illuminates around the display. -
Page 19: Setting The Clock
(reset)" on page 43 for details.] 2 Perform "Setting the clock" from step 1. Note: The clock can also be set with the remote control. CD-G10000 CP-G10000S button to adjust the hour and button once to advance the time by... -
Page 20: Cd Or Mp3 Disc Playback
Listening to a CD or MP3 disc CD-G10000 CP-G10000S This system can play back a standard CD, CD-R/RW in the CD for- mat and CD-R/RW with MP3 files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the equipment used for recording. - Page 21 If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. If a disc is damaged, dirty, or loaded upside down, the disc will skip. CD-G10000 CP-G10000S 5 button and within 5 seconds,...
-
Page 22: Listening To A Cd Or Mp3 Disc
Listening to a CD or MP3 disc (continued) CD-G10000 CP-G10000S Various disc functions Function Main unit Remote control Play Stop Pause Track up/ Track down Fast for- ward/Fast reverse Notes: Track up/track down is possible only within individual discs. Operation The sound is heard during fast forward/fast reverse with a CD, but not with an MP3 disc. -
Page 23: Advanced Cd Or Mp3 Disc Playback
If the direct search buttons are pressed while the disc is stopped, press the button to start the desired track on the current disc. Notes: A track number higher than the number of tracks on the disc can- not be selected. During random play, direct search is not possible. CD-G10000 CP-G10000S... - Page 24 Advanced CD or MP3 disc playback (continued) CD-G10000 CP-G10000S Repeat play Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously. To repeat all tracks on up to 5 discs: Press the button twice.
- Page 25 Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the pro- grammed selections will not be cleared. During the program operation, random play is not possible. During programmed play, the DIRECT PLAY button will not work. CD-G10000 CP-G10000S...
-
Page 26: Mp3 Navigation (Only For Mp3 Files)
MP3 navigation (only for MP3 files) CD-G10000 CP-G10000S MP3 navigation: You can search and play files by folder or title. For example, when you assign three titles to a file, enter genre (such as jazz) as title 1, album name as title 2, and music title as title 3 to search the file by any title. - Page 27 If a folder, title or file name does not appear, or appears incor- rectly, remove and reinsert the disc and try again. If you press the RANDOM button in the stop mode, the MP3 nav- igation mode will be canceled. CD-G10000 CP-G10000S...
- Page 28 MP3 navigation (only for MP3 files) (continued) CD-G10000 CP-G10000S Character search (for folder or title 1/2/3) By entering a name, you can search files by folder or title 1/2/3 within one MP3 disc. Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"...
- Page 29 Even when you exit the MP3 navigation mode, programs by track number are retained, and you can play tracks according to the num- bers. (Programs by track number are cleared when you remove the disc.) CD-G10000 CP-G10000S button. If...
-
Page 30: Listening To The Radio
Listening to the radio CD-G10000 CP-G10000S Auto power on function: When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated. - Page 31 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 While pressing down the ton, press the CLOCK/TIMER button until "TUNER CL" appears. CD-G10000 CP-G10000S ) button for more than 0.5 seconds. ) button again when the desired sta-...
-
Page 32: Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) CD-G10000 CP-G10000S Before playback: For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not rec- ommended.) Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. -
Page 33: Recording On A Cassette Tape
When recording important selections, make a preliminary test to Operation ensure that the desired material is properly recorded. SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). - Page 34 Recording on a cassette tape (continued) CD-G10000 CP-G10000S Recording from a CD or MP3 disc You can record the desired disc using the DIRECT PLAY button. Press the ON/STAND-BY button to turn the power on. Press the CD button. Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
- Page 35 2 Press the TAPE (1 2) button until "TAPE 2" appears on the dis- play. 3 Press the button. 4 Press the button to start erasing. Note: Make sure that the TAPE 1 is not in use. CD-G10000 CP-G10000S TAPE 2...
-
Page 36: Timer And Sleep Operation
Timer and sleep operation CD-G10000 CP-G10000S Timer playback: The unit turns on and plays the desired source (CD, MP3 disc, tuner, tape) at a preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. - Page 37 Do not turn the volume up too high. Press the ON/STAND-BY button to enter the power stand- by mode. The "TIMER" indicator lights up and the unit is ready for timer playback or timer recording. CD-G10000 CP-G10000S button, and then Continued to the next page...
- Page 38 Timer and sleep operation (continued) CD-G10000 CP-G10000S When the preset time is reached, playback or recording will start. The volume will increase gradually until it reaches the preset volume. When the timer end time is reached, the system will enter the power stand-by mode automatically.
- Page 39 If you want to sleep and wake up listening to a tape, and the length of the tape is shorter than the sleep timer setting, timer playback or recording will not be possible. CD-G10000 CP-G10000S button to select...
-
Page 40: Enhancing Your System
Enhancing your system CD-G10000 CP-G10000S The connection cord is not included. Purchase a commercially avail- able cord as shown below. Game system, VCR, DVD player, etc. To the line output jacks White Yellow RCA cord Video cable (not supplied) (not supplied) -
Page 41: Troubleshooting Chart
Troubleshooting chart Many potential problems can be resolved by the owner without call- ing a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom Possible cause... - Page 42 Troubleshooting chart (continued) CD-G10000 CP-G10000S Cassette deck Symptom Cannot record. Is the erase-prevention tab re- moved? Cannot record tracks with Is it a normal tape? (You cannot proper sound quality. record on a metal or CrO tape.) Cannot erase completely.
- Page 43 Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the center, along the radius. Correct CD-G10000 CP-G10000S...
-
Page 44: Maintenance
Maintenance CD-G10000 CP-G10000S Cleaning the tape-handling parts Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages. -
Page 45: Specifications
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification fig- ures indicated are nominal values of production units. There may be some deviations from these values in individual units. -
Page 46: Specifications
Specifications (continued) CD-G10000 CP-G10000S Tuner Frequency range FM: 87.5 - 108.0 MHz AM: 530 - 1,720 kHz Cassette deck Frequency 50 - 14,000 Hz (normal tape) response Signal/noise ratio 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) Wow and flutter 0.3 % (WRMS) -
Page 47: Consumer Limited Warranty
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.