Speaker Connection - Sharp CD-G10000DVD Operation Manual

Dvd mini system/speaker system

Hide thumbs

Table Of Contents

Table of Contents

System connections (continued)

CD-G10000DVD

CP-G10000

ENGLISH

Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM

aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM LOOP socket. Position the AM loop

aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach

it to a stand or a wall with screws (not supplied).

Note:

Placing the aerial on the unit or near the AC power lead may cause noise

pickup. Place the aerial away from the unit for better reception.

Installing the AM loop aerial:

< Assembling >

External FM aerial:

Use an external FM aerial if you require better reception. Consult your dealer.

75 ohm

coaxial cable

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

E-11

*CD-G10000DVD(EN)10-17

Front speakers:

Connect the black wire to the FRONT SPEAKERS (-) terminal, and the red

wire to the FRONT SPEAKERS (+) terminal.

Surround speakers:

Connect the black wire to the SURROUND SPEAKERS (-) terminal, and the

grey wire to the SURROUND SPEAKERS (+) terminal.

< Attaching to the wall >

Caution:

I Connect the speaker wires to the speakers first, then to the unit.

Wall

Screws (not supplied)

I Never mistake the FRONT SPEAKERS and the SURROUND SPEAKERS

I If you use other speakers with impedance lower than

External

FM aerial

I Do not mistake the right and the left channels. The

I Do not let the bare speaker wires touch each

I Do not allow any objects to fall into or to be placed in

I Do not stand or sit on the speakers. You may be