Demonstration Mode - Sharp CD-G10000DVD Operation Manual

Dvd mini system/speaker system
Table of Contents

Advertisement

System connections (continued)
CD-G10000DVD
CP-G10000
ENGLISH
Setting the FM/AM span selector
H
The International Telecommunication Union (ITU) has established that member
countries should maintain either a 100 kHz or a 50 kHz interval between
broadcasting frequencies of FM stations and 10 kHz or 9 kHz for AM station.
The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10
kHz zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to
the interval (span) of your area.
To change the tuning zone:
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Set the SPAN SELECTOR switch (on the rear panel) as follows.
I For 50 kHz FM interval (9 kHz in AM) ¡ 50/9
I For 100 kHz FM interval (10 kHz in AM) ¡ 100/10
3. Whilst pressing down the I6 button and the X-BASS/DEMO button, press
the 5 3 PRESET X button until "CLEAR AL" appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
E-15
*CD-G10000DVD(EN)10-17
15

Demonstration mode

H
The first time the unit is plugged in, the unit
will enter the demonstration mode.
You will see words scroll.
CD-G10000DVD
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the
X-BASS/DEMO button. The demonstration mode will be cancelled and the
display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/DEMO button.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the
extra bass mode.
05.1.17, 10:47
CD-G10000DVD (S)
TINSZA160AWZZ

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-g10000

Table of Contents