Sharp CD-G10000DVD Operation Manual page 74

Troubleshooting chart (continued)
CD-G10000DVD
CP-G10000
ENGLISH
Remote control
H
Symptom
G The remote control G Is the AC power lead of the unit unplugged?
G Is the battery polarity wrong?
does not operate.
G Are the batteries dead?
G Is the distance or angle incorrect?
G Does the remote control sensor receive strong
Video CD
H
Symptom
G Is the TV unplugged?
G The picture is not
G Is the unit connected improperly?
displayed during
G Is the input selector on the TV set to other than
playback.
G Is the unit being played without selecting video
G Is the disc very dirty?
G The picture quality is
poor, or it is distorted.
Karaoke
H
Symptom
G The vocal part of a G Is the karaoke mode set to "L-CH", "R-CH" or "V-
multiplexed disc is not
heard.
E-73
*CD-G10000DVD(EN)72-78 73
Possible cause
light?
Possible cause
"VCR"?
CD?
Possible cause
CANCEL"?
If trouble occurs
H
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if
it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug and plug in the
unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
Before transporting the unit
H
Remove all CDs from the unit. Make sure there is no CD in the disc tray. Then,
set the unit to the power stand-by mode. Carrying the unit with discs left inside
can damage the unit.
05.1.17, 10:51
CD-G10000DVD (S)
TINSZA160AWZZ