Table of Contents
Advertisement
XL-DV484W
Playing a DVD (DVDs)
XL-DV555W
ENGLISH
E-31
*DV484W_EP31-33
31
To play a disc
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button to display the startup screen
shown.
3
Load the disc(s) you want to play.
See page 21 for information about loading discs.
4
Press the 0 button to start playback.
Notes:
I If the disc you are using supports auto start, it starts to play automatically
(even if you do not press the 0 button), as soon as you close the disc tray.
I The indicator "
WRONG DISC TYPE" appears on the display if the disc
you are using is damaged, if you load the disc upside down, or if the region
number of the disc is not supported by this unit. If the above indicator
appears, reload the disc or replace it with another one.
I A safety feature automatically sets the unit to the power stand-by mode if
you set the volume level too high whilst playing certain types of discs. If this
happens, lower the volume level and restart playback.
I The unit also can automatically power on at CD function by pressing DVD/
CD button or performing direct playback (if last used function is CD) by
pressing 0 button in the stand-by mode.
To play the desired disc:
Press one of the s 1 - s 5 buttons to select the desired disc and then press the
CD DIRECT PLAY button.
To stop playback:
Press the
button.
04.2.20, 17:23
XL-DV484W(Z)
TINSZA032AWZZ
1
2
3
4
5
D D
V
6
7
8
9
10
Advertisement
Table of Contents
