Image Files; Introduction To Image Files; Load File - Barco NH-12 User Manual

The input balance settings are stored in the image file, each source has its own input balance.
7.5 Image files
Overview
• Introduction to Image files
• Load file
• Forced file load
• Auto Image
• Edit file
• Save as (create a custom file)
• Rename file
• Copy
• Delete
7.5.1 Introduction to Image files
Image files
An image file contains the main characteristics of a source (number of active lines,...). The projector's memory contains a list of files
corresponding to the most common sources : standard files.
When a new source corresponds to one of these files, a custom file is created. The custom file is automatically saved if a setting is
altered (contrast, ...). The Save as... function allows to create and save a custom file.
The active file can always be edited in order to fit exactly the source specifications.
AutoImage creates automatically the best suited image file (custom file) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom file which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector's OSD or from the desktop's OSD
File notation
The notation of the image file happens as follows :
/Standard/SXGA+@60.xml
Type of file : standard or custom
Image 7-37
7.5.2 Load file
When to load a file ?
In some cases the user wants a particular file to be used for the display of a particular source. In this case the user should load the
desired file from the image files menu. The load file option will allow the user to choose between several files corresponding more
or less to the active source specifications.
In normal operation the file selection (load) will be done automatically by Auto Image.
R59770121 NH-12 04/05/2011
file extension = xml
Vertical freq
Resolution
7. Advanced
71